T-Shirt Trick Works and Learning More About Adobe Processing

It took a little while to perfect it, but the T-Shirt trick works for capturing flats. Unlike my previous attempts, I bought a clean, new white shirt. I gently stretched it over my scope and secured it with a rubber band. I made sure to maintain the same focus I used for my light frame exposures. And, the best trick of all, I switched my camera’s mode to “Av” on my Canon Eos Ra (an amazing Christmas gift from my brother!). The mode automatically picks the correct shutter speed to produce the proper exposure for the flat frame.

White T-shirt, somewhat stretched over my telescope and held in place with a rubber band. Makes all the difference.

As for my light source, I’ve been shooting in my backyard lately. So, once I finished taking my light exposures and my darks and I’m getting ready to pick up, I turn on my white LED porch light. From there, all I need to do is point my score at the light. It’s just as good as using an all-white LCD tablet or laptop screen or resorting to a light box. Except, it doesn’t do my a lot of good when I’m not shooting from my backyard. So, I’ll need to find a good portable light source when I’m working remotely.

Here’s the result of plugging my new flat frames into Deep Sky Stacker and doing some newbie image processing on them in Photoshop. It looked so nice, I had it printed and matted at FedEx Kinkos. Ultimately, you can see how that distorted ring of brightness from the last post is gone now, averaged out by DSS with the flats!

Orion Nebula, M42
A couple hours of exposure time with flats and darks.

The next step for me is to learn more about image processing in Adobe. Right off the bat, I can share just how great the “arcsinh” curve stretches are for performing color-preserving stretches of the TIF file data. The guy who designed these stretches for PixInsight, which is the super expensive astrophotography editing software, created these stretches for Adobe and he explains it all in this post on the Cloudy Nights forum here. Definitely pick these up and install them if you’re using Photoshop for Astrophotography; they’re free.

Here’s a quick and dirty bit of imaging I did using the arcsinh stretches to draw out my images with only a couple hours of exposure time at my local observatory. Granted, the EOS Ra also helps a lot with image quality, too. And even still, there’s a lot that could be done to improve these images of M81 and M82, the Bode Galaxy and Cigar Galaxy, respectively.

M81 and M82, after a couple hours of exposure, some arcsinh stretching, and a really good DSLR camera.

I grabbed 4 hours of exposure time of the Whirpool Galaxy, M51, which was the deep sky target I cut my teeth on over last summer. Assuming I can find some time this weekend, I’m hoping to process that TIF file in adobe and try some more advanced techniques I learned, like creating star masks to preserve star color, tricks to remove light pollution, and (not so advanced) ways to “feather” my lasso’s deselections so I can play with the galaxy separate from the stars and vice versa.

DSLR Astrophotography – The Journey

For the longest time, I relied on my smartphone and a telescope to take pictures of planets and bright nebula. I got pretty darn good at it, too. But learning to use my “old” Nikon D5300 to take pictures through my telescope has really begun to pay dividends.

I purchased my camera not long after I received my 6 inch Celestron PowerSeeker 127EQ scope for Christmas. After attaching my new camera, which I got as a really good Best Buy Outlet refurbished deal, I was quickly discouraged by the image quality. As new to the game as I was, I believed that I could merely connect my camera to the focuser of my scope with a bulky T ring adapter and get better results than my trusty smart phone. I was wrong, obviously. First, I had to disassemble the focuser on that particular scope to remove the corrector lens, which left me unable to use to scope for anything else until I reinstalled the lens. Once I got the camera connected in a state where it could even be focused, I lost so much image magnification compared to my phone and found it nearly impossible to focus cleanly.

I felt like I had wasted $300. I tried some daytime photography of flowers and other things, but I felt like I was getting better pictures from my much cheaper and easier to use Sony Cybershot. So, I shelved the camera for a while until I purchased my first telescope upgrade, my 8 inch Dobsonian, an Orion SkyQuest XT8 and tried again. I had the same issues as before, except now the camera overbalanced the scope, requiring me to drop some more bucks on a half-pound magnetic counterweight. I ended up shelving the camera again.

Early last spring, 2019, a good friend of mine was cleaning out some stuff from his attic and retrieved his old telescope setup. He had purchased it years before, never could figure out how to use it, and just stored it. It included a computerized mount, an Orion Atlas EQ-G, its own 8 inch Dobsonian, and a heavy duty tripod to match.

My Dad had also gifted me an Orion AstroView 90EQ for Christmas. It was the last Christmas gift he would ever get me before he passed on Dec. 30, 2019 from pancreatic cancer. I had hope to use that scope and its steadier equatorial mount to attempt some longer exposures with a battery powered motor driving the mount. I didn’t quite understand, yet, how to get it to work and getting that scope to hold on an image with that setup was a pain, especially with my phone attached.

I ended up combining the AstroView scope with the EQ-G mount. My friend’s Dobsonian was a little banged up and even after cleaning the mirror and collimating it, the image quality wasn’t especially sharp.

And just a quick aside, it took weeks to even get the EQ-G mount working. My friend had misplaced the controller and the AC adapter. A replacement for the controller was somewhere around $200, so I spent a fair bit of time trying to buy the right cable and find the right software to control the mount with my laptop. That ended up being a dead end, so I broke down and purchased the controller.

Before officially going with the AstroView scope, I wanted to learn how to use the mount. I took it out to my local astronomy society’s dark site on top of a levee at the back of a cow pasture. It was an hour drive away and the equipment weighs a ton. The mount alone easily weighs at least 35lbs. The scope was another 30lbs. The counter weights are maybe 15lbs each. And the tripod is maybe 20lbs.

I got it all setup on this levee in the dark and cold, but couldn’t get it polar aligned until a member from the society came over and help me identify the proper star, Polaris, and exposed me to the alignment scope built into the mount with its own special crosshairs for aligning Polaris just slightly off the actual pole of the earth.

After going through multiple iterations of 3-star alignment checks to prep the “Go To” function, I had the heavy Dob and the heavy mount pointed to Orion’s Sword, M42. With my phone attached, I captured my first “long” exposure of the nebula at 10 whole seconds, and was blown away by the color I got.

The months that followed saw me learning to align the mount on my own and attempting to use the 10 seconds of exposure time on my phone to take pictures of the Andromeda Galaxy, Orion’s Sword, and some other deep sky objects (DSOs) that were up in the night sky at the time. I didn’t know I had no chance in hell of getting much of anything back from those with 10 seconds of exposure under a Bortle 7-8ish sky,

I was keenly aware of image stacking and more advanced photo editing options than were available on my phone. I just didn’t have a great way to capture many shots or longer exposures with my phone. That’s when I went back to my Nikon. I reattached it the old Dob, and ran into an immediate problem. It was just too heavy and hard to balance on the end of that Dob. Worse still, was I had virtually the same exposure time limit on the camera as my phone!

Swearing, I started researching how to take longer exposures with a DSLR camera and discovered the existence of intervaluemeters. For $30 I got a little wireless remote control for my camera that let me program multiple shots, up to hundreds if I wanted, for as long as I wanted. It was a game changer for me.

I ditched the old Dob, purchased new rings to be able to attach the AstroView scope to the EQ-G mount and really began my journey with trying to take multiple long exposures of the Whirlpool Galaxy, M51. Andromeda had long since moved on for the year.

I spent night after sweaty, humid night trying and failing to get usable pictures, learning how to point the scope at an object I couldn’t actually see with my eyes, troubleshooting why my images would come out motion-smeared, and beginning to learn how to use Deep Sky Stacker (DSS). And even though I took maybe a few hundred pictures of M51, the results were less than impressive, relative to what even the folks at the local astronomy society were producing.

Note: For those unfamiliar, to take those amazing backyard astrophotography pictures, people take many multiple pictures and use software to align them and “stack” them. More specifically, stacking gives you the best average amount for every pixel on an image. The more images you have, the more noise and artifacts you’re able to remove from the composite image. The result is a far higher degree of image sharpness and detail. The stacking can also have an additive effect, depending on various settings, to make a dim image more visible. The image below of the Whirlpool Galaxy consisted of almost 120 separate pictures.

Whirlpool Galaxy, M51. Images taken with AstoView 90EQ telescope and Nikon D5300. Processed 7-12-2020.

My first thought was, I needed a better scope. Despite the sentimental value attached to the AstroView, it just wasn’t cutting it. So, I bought my most expensive scope, yet, an Orion Ritchey-Chretien 6 inch (White) scope designed for astrophotography.

I began getting better images, but I was still limited to roughly 1-minute exposures before stars would begin to streak. Frustrated, I was glad to move onto planetary targets with this new scope and my knew experience with image stacking. Feeling like I had graduated from my phone, I purchased the Orion Starshoot Mini. It was primarily designed for planetary imaging, but it could also be used for DSOs, as well. I believe that since it was such a new product, it must be capable of producing better images than my Nikon and I could see them much more clearly on a laptop screen than the flip out screen on my camera.

The Starshoot Mini is an excellent planetary camera. But I had a much harder time getting multi-gigabyte video files of planets to align and stack properly in Registax 6, which is used for planetery image stacking, as opposed to DSS. I was able to capture and process my best image of the distant planet Uranus below. But it took hours of trial and error to get such a faint set of video frames to align and stack properly. I also took a stab at Mars and its close approach, but was still new to the setup. Focusing is difficult. So the results weren’t super great. Also below.

Uranus. Processed 12-20-2020. Images taken in late October with Orion Starshoot Mini and Orion Ritchey-Chretien 6 inch telescope.
Mars. Images process and taken in late October 2020 with Orion Starshoot Mini and Orion Ritchey-Chretien 6 inch telescope.

Once Mars began to drift away and Andromeda began to rise into the sky, I shifted to trying to captures image of it with my Nikon. But this time I had the bright idea of repurposing my Orion Starshoot Mini as my autoguider. I purchased an autoguiding scope to fix the Starshoot Mini and attached it to my telescope. I then downloaded and installed PHD2 to act as my autoguiding software. Aside from the initial setup, it’s been pretty easy to use and I’ve been able to take some images with 3-minute long exposures without streaking. For those unfamiliar, the software uses the Startshoot Mini camera to identify a particular star (you select it) and it sends directions to the mount to adjust its motion by tiny amounts to keep that star as still as possible in the camera, or put another way, it keeps the mount following the star so perfectly, the star appears to be still to the camera (image the camera displays on screen).

And now I was shooting long exposures with my Nikon D5300. It only took almost two years to get there.

The setup isn’t perfect, however. Whether the EQ-G mount is just old or could use some servicing, I had to get the balance of the scope and the counterweights as close to perfect as possible or PHD2 will flash at me that it can’t make enough adjustments to keep the scope aligned. It’s something I’m still trying to completely understand, but the results have been thus far promisingly spectacular. See below.

Orion’s Sword, M42. Images taken 12-8-2020 with Nikon D5300 and Orion Ritchey-Chretien 6 inch telescope. Variation of image used sometimes as this site’s header image.
Andromeda Galaxy, M31. Images processed 11-19-2020 and taken with Nikon D5300 and Orion Ritchey-Chretien 6 inch telescope. Earliest attempt at capturing and stacking long exposure images.
Triangulum Galaxy, M31. Images taken with Nikon D5300 and Orion Ritchey-Chretien 6 inch telescope near Christmas and processed 12-25-2020. It’s a little faint but it was my first attempt at this particular galaxy and is comprised of only about 15 images.

That’s where I’m at in my journey of learning to capture astrophotography images with a DSLR camera. And in the coming weeks, I hope to refine my craft more and capture even more DSOs. I even have a wonderful new camera that will replaced my sorely misjudged Nikon D5300, but I’ll write about it later.

That said, once I started seeing this huge leap in image quality from what I had been getting, I re-researched my old Nikon. And it’s a damn fine camera for Astrophotography. If you’re just getting your feet wet with this hobby and you can find a good deal on a refurbished D5300, then you can’t go wrong. It takes great pictures and accessories for it abound, unlike some higher end cameras.

One thing I’m leaving out of this post to save space and time is my experience learning how to process images in Adobe Photoshop, as well as some of the minutia of astrophotography like capturing dark frames. You can’t produce these images without being able to “stretch” the data you’re collecting in some image processing software. The folks at my local astronomy society provided me with a guide early only explaining some of the ins and outs of capturing images, but I learned about processing images in Adobe primarily from experimentation and the YouTube Channel, AstroBackyard.

Verified by MonsterInsights